+86-371-67991755
Request Quote
All gears and mating surfaces of the melt pump produced by our company are finely ground and assembly clearance is strictly controlled to obtain accurate flow. ZB-B series of gear and pump body adopt chromium-nickel alloy steel and high tem
Generally, using the existing conventional single screw extruder in series with the melt pump , conservatively estimates, the output will also increase by 10% - 15%. According to rough estimation method, the output can be increased by 5%-7%
The control part of the melt pump is usually composed of frequency conversion motor, gear transmission, transmission shaft and so on. In the process of installation, it is necessary to find the concentricity of the input shaft and the outpu
Polypropylene metering pump conveys dangerous chemicals. When TEAL transported by the pump ignites with air and explodes in water, if the treatment is not clean, it is easy to cause casualties when the pump head of the polypropylene meterin
1. Harmonic gear pump has symmetrical structure and two discharge chambers and two feed chambers are opened symmetrically with respect to each gear. Therefore, the force acting on the radial hydraulic balancing gear and bearing on the trans
Extruder gear pump
Booster melt pump
Rubber extrusion pump(ZB-R)
thermoplastic extrusion pump
External lubrication type melt