How the Plain Bearings of Melt Pumps Maintain Stable Operatio
The plain bearings inside a melt pump support the gear shafts and bear working loads within a compact structure, specially designed to adapt to high-temperature conditions and material properties of polymer extrusion.
For melt pumps adopting medium lubrication, the conveyed polymer material flows into the clearance between the journal and bearing. As the shaft rotates, a load-carrying lubricating film forms under proper fitting tolerance, material viscosity and rotating speed, which prevents direct metal-to-metal contact and reduces friction. It should be noted that stable discharge of the pump does not guarantee sufficient lubrication at the bearing positions.

Multiple factors determine the running condition of these bearings. First is material viscosity and feeding. Too low viscosity fails to build up a complete lubricating film, while excessively high viscosity brings extra flow resistance and viscous friction. The polymer must reach the supporting areas as designed.
Temperature is another key factor. It changes material viscosity and causes thermal expansion of mechanical parts. Operators need to monitor real-time temperature values and temperature distribution during continuous production.
Pressure and working load also matter. Fluctuations of inlet and outlet pressure and pressure difference will alter the load on bearings, which should be evaluated together with material status and rotating speed.
Lubrication performance differs greatly at startup, low-speed operation and steady production stages. Insufficient lubrication cannot be simply compensated by raising the rotating speed.
Besides, material composition and component condition cannot be ignored. Hard impurities, corrosive components, accumulated wear and assembly errors will destroy the matching clearance. Special assessment is required when processing filled polymer compounds.

If abnormal symptoms such as overheating, unusual noise or fluctuating driving load occur, operators need to check feeding condition, temperature control, pressure parameters, transmission system and internal pump parts comprehensively. It is improper to draw a hasty conclusion that the bearings are damaged.
Email: sale@meltpump.com
WhatsApp: +86 158 3833 1071