batte melt pump

The connection between thermoplast extrusion pump and extrude

The flow rate of the thermoplast extrusion pump head varies with the change of the outlet pressure, but the fluctuation of the general outlet pressure can not exceed (+10 psi). If the fluctuation is large, it is likely to be a transmission

What are the characteristics of melt metering pump conveying

The conveying device of the melt metering pump is composed of three parts: the transmission system, the melt metering pump and the control system. The drive system includes AC motor, reducer and frequency converter, while the control system

Analysis of Gear Discharge Problem of thermoplast extrusion P

Melt pump is a new type of heating equipment, which can save energy and reduce emissions. Thermoplastic extrusion melt pump can supply 340 C temperature and 0.8 MPa working pressure, which is very safe and reliable. Melt pumps are widely us

Study on Performance and Structure of Double-drive Melt Pump

Configuration of melt pump in polymer extrusion processing system can reduce the requirement of extruder pressure building and conveying capacity, greatly improve the output and stability of production line, and significantly reduce the tem

Method of Dismantling Standard Melt Pump

1. After the melt pump disintegrates, the gear and sealing assembly should be lightly placed on the clean table, and the components should be cleaned first with compressed air or clean cotton cloth. The wear, cracks, burrs and scratches of



©2019 Batte Mechanical Zhengzhou Co,.Ltd. All rights reserved. sales@battemachinery.com
Batte is a professional screen changer manufacturer, supplying screen changer, especially screen changer for extrusion mould